Connect to an Insight, Stratos, or the Deep and Steep app to change the settings of your Soundlink.
Altitude Alarms #
Alarms using distinct tone patterns can be saved for freefall and canopy. Each set of alarm altitudes can be saved as a “preset”. Up to 4 presets can be stored by the Soundlink.
Freefall alarms: Choose up to 4 alarm altitudes for freefall.
Canopy alarms: Choose up to 4 alarm altitudes for canopy flight.
Announcements #
The Soundlink can “announce” different data during freefall, canopy, or both. The Soundlink does not need a connection to an Insight/Stratos to use the altitude and vertical speed announcments.
Announcement types available without a bluetooth connection
| Altitude Vertical Speed |
Announcement types that require an active connection to an Insight or Stratos. The Soundlink receives data from the GPS altimeter used in these announcements.
| Groundspeed Groundtrack LZ Distance LZ Glide Current Glide Direction to LZ |
Announce Mode: Select between freefall + canopy announcments, freefall only, or canopy only.
Announce Frequency: All of the announce types, except for altitude, can change how often they are played. Choose between 5 settings from slow to fast. The rates are adjusted differently for freefall and canopy.
If altitude is selected as the announce type, the Soundlink will speak the altitude every 1,000 feet (or 500 meters) in freefall. Under canopy at 1,500 feet and lower the Soundlink will speak the altitude every 100 feet.
If a canopy alarm “Final” is configured, the Soundlink will stop speaking any other information after the “Final” alarm is played. This is designed to reduce distraction while landing.
Audio Settings #
FF volume settings: 1 to 5 (low to high)
CP volume settings: 1 to 5 (low to high)
Alarm Pitch: 1 to 5 (low pitch to high pitch)
Devices Settings, Units, Time, Date, and LZ Offset #
Soundlink settings are updated when connected with an Insight, Stratos, or the Deep and Steep app.
Insight/Stratos connection: When a bluetooth connection is established with an Insight or Stratos, the altitude units (feet or meters), time, date, and active LZ offset are synced to the Soundlink. This sync can also be forced from the Settings menu on the Insight/Stratos.
App connection: When a bluetooth connection is established with the app, the time and date are synced to the Soundlink.
The app has separate controls to select the altitude units, and to configure an LZ offset and save that information to the Soundlink.
